How To Connect The Outputs Of The Controller - Agilent Technologies Turbo-V 750 TwisTorr Mode D'emploi

Table des Matières

Publicité

17
Technical Information
Stop Speed Reading

How to Connect the Outputs of the Controller

The following figure shows a typical logic output connection (relay
coil) but any other device may be connected e.g. a LED, a computer,
etc., and the related simplified circuit of the controller.
The following figure refers to the programmable set point signal on
pins 11 and 9.
Figure 53
The following figure shows a typical output connection to a relay coil.
Figure 54
354/406
Typical output connection
Output to a relay coil
Turbo-V 750/850 TwisTorr User Manual / 87-901-020-01
(A)

Publicité

Table des Matières
loading

Table des Matières