Télécharger Imprimer la page

GUTMANN Stratos 592 Notice D'utilisation page 27

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
Optional:Operation Via Remote Control
Button 1: Function 1 – Operation ON/OFF
Function 2 – Cool down period (activate the
cool down function by pressing button 1
again; the ceiling device will automatically
decrease by one power level within a short
time until it finally turns off)
Button 2: Power level in the sequence 1-2-
3-2-1 of the individual power
levels
Button
3:
Intensive
automatically
3 minutes)
Button 4: Light ON/OFF, the illumination can
be dimmed if the button is held
for
a period of time.
Battery Tray 5: Please use AA batteries
exclusively.
level
(motor
returns to level 3 after
Optional:Switch Panel
The switch panel consists according to the
model type of five or seven key buttons.
Power of the supercharger
The first four buttons control the power of
the supercharger.
Button „1"
= low performance of the
supercharger
Button „2"
= middle performance of the
supercharger
Button „3"
= high performance of the
supercharger
Button „Int" = intensive level
Press any button to switch on the extractor
hood. The hood is switched off by pressing
the back-lighted keys once more. The
extractor hood automatically switches back
after 3 min. from the intensive level to level
3 (high performance of the supercharger).
Automatic Cool Down Period
The automatic cool down period is activated
by pressing the button with the clock symbol.
The exhaust hood will progressively switch
from level 3 down to level 1 and run at that
level for approximately 15 minutes before
turning off.
Lighting
Press the button with the light symbol to
turn on the illumination. The illumination is
turned off by pressing the button again. The
illumination is dimmed by pressing and
holding the button for a longer period.
Brightness is raised again by another long
press of the button.
Clean Grease Filter Alert
When the clean grease filter alert lights up
(right button), the filter must be cleaned. Af-
ter cleaning the filter, press and hold the
right button (3) for at least 5 seconds. The
alert light will turn off. The clean grease filter
alert will be activated after a maximum of
15 operating hours or 14 days (even if not-
hing has been cooked
en

Publicité

loading