Features & Controls; Laminated Touch Controls - Zephyr Lux ALU-E43CSX Guide D'utilisation, D'entretien Et D'installation

ZEPHYRONLINE.COM

Laminated Touch Controls

8 Bluetooth® Indicator 9 Wi-Fi Indicator
6 Replace Charcoal Filter Indicator
1. Blower On/Off
►
By pressing On/Off, the blower is switched on and off. When switched on, the blower starts up on
speed level 1.
2. Fan Speed Selection
►
Pressing Fan cycles through the fan speeds from 1 to 2, 3 and off. The current speed level will be
indicated by the lit graphics.
3. Lights; Off/Low/Medium/High
►
Pressing Light cycles through the light levels from 1 to 2, 3, and off. The current light level will be
indicated by the lit graphics.
4. Auto Delay Off
►
This feature is used for programmed shutdown of the blower 10 minutes after the function is
activated. The fan speed level will change to 1, and the Auto-Off graphic will illuminate. Press and
hold On/Off for 3 seconds while the fan and/or lights are on to enable auto delay off. The blower
will completely shut down after 10 minutes. The Zephyr Connect app provides the options for
either 5 or 10 minutes.
5. Clean Air Active
►
When activated, it turns the hood on fan speed level 1 for 10 minutes every 4 hours and will be
shown by the indicator lighting up and fan speed level 1 slowly pulsing. To enable Clean Air Active,
press and hold Light and Fan for 3 seconds while the hood is off.
Lux Use, Care, and Installation Guide
1 Blower On/O
3
Lights; Low/Medium/High/O
5 Clean Air Active Indicator
Features & Controls
2 Fan speed indicator
4 Auto-O Indicator
2
Fan; 3 speed levels
7
Clean Grease Filter Indicator
21