D E S I G N E R
Maintenance
L U X
I S L A N D
Removing and Installing the Grease Filter (FIG. W)
NOTE: Prior to use, remove the protective film from the filter frame.
1. To remove the aluminum mesh filter, pull down on latch tab to disengage the filter from hood.
2. Tilt the filter downward and remove.
1. To install the aluminum mesh filter, align rear filter tabs with slots in the hood. Pull latch tab down.
Push filter into place and release tab.
2. Make sure the filter is securely engaged after installation.
Model ALU-E43
Model ALU-E63
FIG. W
28
Lux Use, Care, and Installation Guide