Ducting Options - Zephyr Lux ALU-E43CSX Guide D'utilisation, D'entretien Et D'installation

Installation Instructions

Ducting Options

spaces between walls, crawl spaces, ceilings, attics, or garages.
All exhaust must be ducted to the outside, unless using the
►
Use single wall rigid metal ductwork only.
►
Fasten all connections with sheet metal screws and tape all joints w/ certified Silver Tape or Duct
Tape.
6" or 10"
round duct*
30" to 72"
above cooking
surface
* 6": CBI-290C, CBI-600A
* 10": CBI-290C, CBI-600A, PBI-1100B
CBE-1000A, PBN-1000A
Attic or crawl space
Blower
housing
30" to 72"
above cooking
surface
** Air return vent must be a minimum of 6 feet from hood. Recirculating kit, ZRC-01LX, is only
compatible with single internal blower models, CBI-290C and CBI-600A.
10
WARNING
Fire Hazard: NEVER exhaust air or terminate ductwork into
recirculating option.
Roof Cap
Blower
housing
30" to 72"
above cooking
surface
Optional Recirculating Kit
6" round
10" round
duct
30" to 72"
above cooking
surface
Roof Pitch w/
Flashing & Cap
10" round
duct
In-line
blower
duct
Air Return
Vent**
Lux Use, Care, and Installation Guide
Blower options are from top, side or front
of blower housing
D E S I G N E R
L U X
I S L A N D