Hood Preparation - Zephyr Lux ALU-E43CSX Guide D'utilisation, D'entretien Et D'installation

ZEPHYRONLINE.COM

Hood Preparation

1. Push in lock tab behind center of perimeter panel to open the hood, FIG. F.
2. Open the perimeter panels and remove the mesh filters, FIG. G.
3. Remove the central panels, unscrewing the 3/16 x 1/4 screws, FIG. G.
4. Remove the (2) light panels by unscrewing the 3/16 x 1/4 screws (ALU-E43 model only), FIG. H.
Lux Use, Care, and Installation Guide
Model ALU-E43 only
Installation Instructions
FIG. F
FIG. G
REMOVE (4+4)
MOUNTING
SCREWS (3/16 x
1/4 Flat Head)
FIG. H
REMOVE (4)
MOUNTING
SCREWS (3/16 x
1/4 Flat Head)
15