Zephyr Lux ALU-E43CSX Guide D'utilisation, D'entretien Et D'installation page 22

Features & Controls
Laminated Touch Controls
6. Recirculating Mode Reminder - Replace Charcoal Filter
►
If this feature is enabled, after 200 hours of fan use, the indicator will illuminate. Press and hold
On/Off, Light, and Fan for 3 seconds while the hood is off to enable this feature. Press and hold
On/Off and Light for 3 seconds while the hood is off to reset the reminder.
7. Clean Grease Filter
►
After 120 hours of fan use, the Clean Grease Filter indicator will illuminate. To reset the reminder,
press and hold On/Off and Fan for 3 seconds while the hood is off.
8. Bluetooth®
►
The Bluetooth® icon will illuminate when connected to the hood via Bluetooth®. To enable
Bluetooth® pairing mode, press and hold Fan for 3 seconds when the fan and lights are off.
9. Wi-Fi
►
The Wi-Fi icon will illuminate for 30 seconds when the hood successfully connects or re-connects
to a network.
►
When the hood fan or lights are powered on, the Wi-Fi icon will illuminate to indicate the
connection status. If it is not illuminated, it means the hood is not connected to the internet.
10. Remote Control Pairing Mode
►
Press and hold Light for 3 seconds when the fan and lights are off to put the hood into
remote control pairing mode. Indicators will slowly blink while in pairing mode until the remote
synchronizes.
22 Lux Use, Care, and Installation Guide
D E S I G N E R
L U X
I S L A N D