Monitor Bed Status Through The Rs232 Connection - Arjohuntleigh Enterprise 9600X Notice D'utilisation

Monitor bed status through the RS232 connection

The bed continuously transmits data about its status through
an RS232 connection at the head end of the bed (see page 9).
The transmitted data can be recorded by a compatible device
for monitoring purposes.
An RS232 serial cable is not supplied by ArjoHuntleigh.
Data is transmitted every ten seconds and includes the
following information:
This information can be stored in a database.
WARNING
Data retrieved from the RS232 connection is not intended to be
used to make clinical decisions. All patient diagnosis, treatment
and care should be performed under the supervision of an
appropriate healthcare professional.
46
• Patient weight
• Bed exit alarm (on or off)
• Backrest Angle in degrees relative to horizontal
• Bed height at low position (yes/no)
• Side rail position (up/down)
• Brake position (on/off)