Weighing System - Arjohuntleigh Enterprise 9600X Notice D'utilisation

Weighing
system
Caution
To prevent damage to the weighing mechanism, replace the
transport locking bolts and washers before transporting the bed.
This is not necessary when moving the bed short distances over
smooth surfaces.
When replacing the transport locking bolts care must be take to
avoid trapping or damaging any cables.
Position the bed on a flat, level surface and apply the brakes
(see page 13).
Remove the four transport locking bolts (1) and washers (2);
there are two locking bolts at the head end of the bed and two
at the foot end.
2
1
Fig. 2 - Removing the transport bolts
Retain the bolts and washers in case the bed needs to be
transported at a later date.
2
1
7