Installation; Preparing The System For Use; Installing The Mattress - Arjohuntleigh Alpha Active 4 Manuel D'utilisation

3.

Installation

Preparing the system
for use
Installing the
Mattress

If the bed can be profiled to any position (i.e. raised or lowered), attach the
mattress to the movable parts of the bed only.
To Complete the
Mattress Installation

The CPR must be accessible at all times.
Remove the system from the packaging. You should
have the following items:
•
Alpha Active 4
and hanging brackets.
•
Alpha Active 4
tubeset.
• Cover.
The
Alpha Active 4
be installed as follows:
1. Remove the existing mattress from the bed frame
and check that there are no protruding bed springs
or sharp objects on the bed frame surface.
2. Unroll the mattress onto the bed frame and ensure
that the tubeset is located near the foot end of the
bed and the CPR at the head end. The cells of the
mattress must be uppermost.
3. Secure the mattress to the bed frame using the 6
fastener straps.
Complete the installation of the mattress replacement as
follows:
1. If not already fitted, place the protective cover over
the mattress. Ensure that the logo is uppermost and
at the foot end of the mattress.
2. Zip the cover onto the mattress starting from the
head end and taking care not to trap any material in
the zip.
3. Ensure that the CPR unit is secured in it's closed
position.
5
pump including mains power cord
mattress replacement with integral
mattress replacement system should