ADE CK 1720 Mode D'emploi page 41

− Press the WAVE button briefly.
‚ If the reception was not successful, the dot
next to the radio mast symbol
after a few minutes and the time will be
displayed normally.
‚ Upon successful signal reception, the radio-
controlled alarm clock adjusts itself to the
time of the time signal transmitter. If you
have already set time manually, it will be
adjusted automatically .
Setting the time manually
If there is a delay of more than
approx. 20 seconds between two
pushes of a button, the setting
process is automatically terminated.
1. Press the SET button until "24 Hr" appears on
the display.
2. Select the desired time format ("12 hr" or "24 hr")
by turning SET (+/–).
will go off
41