Steam Ironing - Euroflex AIRFLUX IB 10 VAPOR Notice D'utilisation

6. Steam-ironing
- As soon as the green indicator light "steam generator" (9) lights up and the warming-up indicator light
on the iron (11) comes off, Airflux ironing station is ready to use.
- Push the "steam" button (4) on the iron.
Warning: The steam emitted is very hot.
Interruption of the steam emission
To interrupt the emission of steam simply release the "steam" button (4) on the iron. When you are not
ironing place the iron on the iron-rest mat (2).
Steaming
Push the pedal (19) to blow. The steam spreads on the whole surface of the ironing board, enabling you
to eliminate creases without using the iron, since not all clothes need a perfect ironing and many cannot
be ironed, ex. wool jumpers, silk or polyester scarves, pressed t-shirts, pile polo-shirts, sweatshirts, etc.
To stop the steaming release the pedal.
IMPORTANT: after steaming it is necessary to use the suction function to dry and fix the ironing. Put the
switch on the I position, then push the pedal. The ironing board starts vacuuming drying your clothes
and eliminating the steam inside the surface of the ironing board.
Steaming plus ironing
To iron difficult fabrics like linen, cotton, jeans, as well as very dry fabrics: the steaming will moist the
garments and the iron will iron and fix the fabrics professionally.
Put the switch on the II position. Push the button of the iron, and the pedal to steam while ironing.
After ironing, turn the iron off and stop steaming putting the switch on O (steaming blocked).
Then, put the switch on the I position and push the pedal. The ironing board starts vacuuming drying
your clothes and eliminating the steam inside the surface of the ironing board.
Going back to normal mode
It is not necessary to use the pedal. You can blow and suction automatically using the switch on the
general control panel (see general instructions for use).
26