Starting The Appliance - Euroflex AIRFLUX IB 10 VAPOR Notice D'utilisation

4. Starting the appliance

- Insert the plug of the ironing board into the mains socket.
- Place the iron on the iron-rest mat (2).
- Turn the appliance on [mains switch (7)]. The orange indicator light (11) in the iron lights up and stays
on. The indicator light (11) comes off as soon as the soleplate reaches the set temperature. The iron
warms in 3-5 minutes. Pushing the on/off button the ironing board starts warming as well. A built-in
thermostat steadily controls the warming temperature of the ironing board. While warming-up the
appliance may emit some noises. It is a normal phenomenon, that should not alarm you.
- As soon as the "ready-steam" indicator light (9) lights up the pressure has been reached and the
steam generator is ready to use. The steam generator warms up in about 10 minutes. This time may
be reduced using lukewarm or reducing the amount of water in the boiler.
- For the suction function set the switch to the position "-"
- For the blowing function, set the switch to the position "+"
suction function
blowing function
- To steam-iron all fabrics, set the temperature control (5) to the steam emission position.
steam emission position
- To steam-iron push the steam button (4) on the iron.
on/off button
ready-steam light
power indicator light
steam emission
24