Using The Snapshot Button - Optelec Compact+ HD Manuel D'utilisation

Optelec

Using the snapshot button

The snapshot button allows you to take a temporary picture of a text or an
image.
- Hold or place the Compact
capture.
- Press the snapshot button located on the top right side of the unit to take
the snapshot.
- Bringing the Compact
the object or text closely.
- Press the Mode button to change the viewing mode.
- Use the magnification buttons located to the right side of the screen to
change the magnification of the displayed image in 3 steps.
- While viewing the taken image, press the snapshot button for 2 seconds
to save the image and return to the life video mode. A short beep and
the onscreen indicator will confirm that the image has been saved. A
maximum of 4 images can be stored inside the Compact
new image will replace the oldest image in memory.
- Press the snapshot button again to unfreeze the image. It is now
possible to take a new snapshot.
English
+
HD over the text or image you wish to
+
HD closer to your eyes will enable you to view
+
Compact HD
+
HD memory. A
20