Standard Boiler; Accessories - Elco R600 Notice D'installation Et D'emploi

Extent of delivery

Standard boiler

Accessories

Standard boiler
A boiler delivery package contains the
following components:
Component
Boiler fully assembled and tested
Adjustable feet
Syphon for condensate connection
Conversion kit for natural gas L and propane incl. instruction
Operation and Installation manual
Spare parts list
Wiring diagram
Accessories
Additional to the boiler, the following
accessories can be ordered:

Standard 3-step pump incl. connec-
tion kit;

Speed controlled pump incl. connec-
tion kit;

Safety valve, manometer and de-
aerator (3,4,5 or 6 bar) incl. connec-
tion kit;

2x max. water pressure switch and 1
external high limit thermostat incl.
connection kit;

Gas filter incl. connection kit;

Max. gas pressure switch;

External high limit thermostat incl.
connection kit;

Gas valve leakage tester (not possi-
ble for R601);

Controlled bypass (incl. pump) incl.
connection kit;

Plate heat exchanger (dT=10K/15K or
dT=20K) incl. connection kit;

Low velocity header, suitable for
dT=10K/15K and dT=20K incl. con-
nection kit;

Duo header for connecting 2 boilers
in cascade (excl. connection kit);
Pcs.
1
4
1
1
1
1
1

Extension module AVS75 for heating
zone control or external gas valve
and/or room fan control.
For each boiler a maximum of 3
AVS75 modules (2x heating zone, 1x
ext. gas valve / room fan) can be inte-
grated in the boiler;

Additional RVS63 heating zone con-
troller, when controlling more than 2
zones (incl. wall hung box, all neces-
sary sensors and sockets and con-
nection material for bus communica-
tion).
The above accessories are specially
designed for the R600 boiler and there-
with easy to install (plug and play). By
choosing a combination of the kits men-
tioned above, you can create your own
complete system solution. Ask your
supplier for more detailed information.
Package
Mounted on wooden blocks with wooden border,
sealed in PE foil
Mounted on frame of the boiler
Cardboard box on top of heatexchanger
(under casing)
Cardboard box on top of heatexchanger
(under casing)
Map attached to back panel of the boiler
Map attached to back panel of the boiler
Map attached to back panel of the boiler
7