Operating Instructions - LAS 11896 Manuel De L'opérateur

5. OPERATING INSTRUCIONS
5.1 OVERVIEW
1 Loose part of wheel clamp
2 Fixed part of wheel clamp
3 Lock with protective cap
5.2 ATTACHING THE WHEEL CLAMP
In order to attach the wheel clamp to a wheel, you must open it first. To do this, put the key in the lock (Position 3 in the overview) and turn the key 90°
anticlockwise, as in Figure 2. The lock will be released. Turn the key back and remove it, as in Figure 3.
Now pull the fixed (Position 2 in the overview) and loose (Position 1 in the overview) parts of the wheel clamp apart, as in Figure 4.
Place both halves of the wheel clamp on the wheel of the vehicle which needs securing. Join both halves again and slide them together. Press the lock down
with one hand, while you slide the loose part of the clamp into the fixed part as far as possible, until the lock engages and is pressed all the way down. The
vehicle is now secured, as in Figure 5. Place the protective cap on the lock.
Figure 2: Opening the lock
Attach a warning sign to announce that a wheel clamp is in use, and make sure it is in a place which is easy to see. e.g. a note on
the steering wheel, or on the coupling of a trailer.
5.3 REMOVING THE WHEEL CLAMP
Unlock the wheel clamp and release the lock. Pull the halves of the clamp apart and remove them from the wheel of the vehicle.
6. MAINTENANCE AND CARE
6.1 MAINTENANCE
Regularly lubricate the lock with a resin-free oil.
6.2 CARE
Clean the wheel clamp with a lightly moistened, soft cloth and a mild cleaning agent. Do not use aggressive cleaning agents, solvents or petrol. Ensure that
no cleaning agents or liquids enter the tubes of the wheel clamp. Store the wheel clamp in a dry location.
7. NOTES REGARDING ENVIRONMENTAL PROTECTION
Please dispose of this device via the recycling bin, or the public/municipal collection points.
The materials are recyclable. You make an important contribution to protecting our environment by recycling, material utilisation or other forms of reusing
waste equipment!
8. CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
Figure 3: Releasing the lock
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
Figure 4: Opening
the wheel clamp
info@eal-vertrieb.com
www.eal-vertrieb.com
Figure 1: Overview
Figure 5: Vehicle secured
5