Scope Of Delivery; Technical Design; Technical Data - SATA SATAjet K 1800 spray mix Mode D'emploi

Operating instructions
rial nozzle under high pressure. The material nozzle geometry defines the
spray height and the spraying angle. The spray fan pattern can be adjust-
ed by adding more compressed air at the air cap.
5.

Scope of Delivery

■ Spray gun without material nozzle
■ Universal spanner
■ Depending on the variant:
material strainer 100 msh (fitted in the material filter housing)
■ Operating Instructions
After unpacking, check:
■ Spray gun damaged
■ Complete scope of supply
6.

Technical Design

SATAjet K 1800 spray mix
[1-1] Suspension hook with
suspension hole
[1-2]
Fully variable round/flat fan
control
[1-3] Closing screw
[1-4] Spray gun body
[1-5]
Trigger lock
[1-6]
Compressed air connection
SATAjet K 1800 spray mix (with material filter, short) [1-15]
[1-30] Material connection
[1-31] Material filter housing, short
SATAjet K 1800 spray mix (with material filter, long) [1-11]
[1-28] Material connection
[1-29] Material filter housing, long
7.

Technical Data

Recommended gun input pressure (air)
SATAjet K 1800 spray mix
0.5 bar - 3.0 bar
[1-7] Trigger
[1-8]
Material connection
[1-9]
Contact protection
[1-10] Nozzle set with air cap,
material nozzle and
pre-nozzle (material nozzle
not included in scope of
delivery)
[1-32] Colour tube
[1-18] paint pipe
7 psi - 44 psi
EN
125