Milwaukee M18 HCC75 Notice Originale page 11

MAINTENANCE
Remove the battery pack before starting any work on the appliance.
Never open the cable cutter, removable battery or charger.
Check the cable cutter for any problems such as noise or jamming of moving parts that could be a ecting the tool.
Check the cutting tools for cracks and other signs of wear.
On completion of the work, clean and grease the cutting tools.
Check that the cutting edges are sharp and replace worn cutting
jaws.
CHANGING THE BLADES
Replace the blades when they become chipped or damaged. Always replace blades as a set. Use only MILWAUKEE blades.
1. Push the trigger to close the blades slightly.
The retaining rings must be exposed.
2. Remove the battery pack and pull the
slide switch in position lock.
Deutsch
49 162 774
English
9
GB