Repair - Festo EGC-TB-KF Notice D'utilisation

EGC-TB-KF, EGC-HD-TB
For greasing the bearing guide (not possible for
EGC-...-GP/GQ):
1. Calculate the load comparison factor fv with
the aid of the formula for combined loads
(è 12 Technical data) and determine the lub­
ricating interval S
int
2. Grease the bearing guide on both sides at all
relubrication openings aB.
3. Move the slide over the complete travel dis­
tance during lubrication in order to distribute
the grease equally inside.
9

Repair

Note
Retensioning of the toothed belt reduces its service life considerably. In addition, the
technical data, e.g. the feed constant, change.
• Make sure that the toothed belt is not retensioned.
The toothed belt is pretensioned so that it does not have to be retensioned during
its service life.
• Recommendation: Send the EGC to our repair service.
This way the fine tuning and tests that are required will be taken into particular consideration.
• Information about spare parts and auxiliary means can be found at:
(è www.festo.com/spareparts).
32
from it (è Fig. 12).
Fig. 12
Fig. 13
Festo – EGC-TB-KF, EGC-HD-TB – 1505b English
f v
aB