Operation; Before The Fi Rst Usage - SilverCrest SKACD 1000 A1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operation

Before the fi rst usage
WARNING - PROPERTY DAMAGE!
Never fi ll the water tank 2 with a total volume of more than 10 cups of wa-
ter. Never pour less than 2 cups of water in the water tank 2. Doing so may
damage the coff ee maker. Use the water level indicator on the water tank 2.
Disconnect the coff ee machine immediately after use. The appliance is com-
pletely free of electrical power ONLY when it is unplugged.
Fill the water tank 2 with water only. Otherwise, the coff ee maker may be
damaged.
1) Carefully rinse the glass jug 7 with mains water.
2) Remove the fi lter holder 8.
3) Pour water into the water tank 2. Empty the water tank, in that you carefully
tip the appliance over a sink and pour the water out. Then carefully dry the
appliance.
4) Rinse the fi lter holder 8 with clean water and place it back into the appliance.
5) Fill the glass jug 7 with 10 cups of water.
6) Completely fi ll the water tank 2 with the water.
7) Close the lid 1, ensuring that it engages.
8) Place the emptied glass jug 7 onto the keep-warm plate 4.
9) Insert the plug into a mains power socket.
10) Switch the coff ee machine on with the On/Off switch 5. The integrated
control lamp glows. Wait until the brewing process is complete.
11) Switch the coff ee machine off with the On/Off switch 5. The integrated
control lamp goes out.
12) Empty the glass jug 7 and clean it as described in the section "Cleaning
and Care".
13) Wait until the appliance has cooled down.
SKACD 1000 A1
GB
49

Publicité

Table des Matières

Dépannage

loading

Table des Matières