Operation; Filling The Water Tank; Filling The Milk Tank - SilverCrest SEMM 1470 A1 Mode D'emploi

Operation

Filling the water tank

NOTE
► Use only fresh drinking water to prepare espresso/cappuccino/latte
macchiatto.
1) Remove the water tank lid
of the appliance.
2) Fill it with water to at least the Min marking. Never fill it with more water than
up to the Max marking.
3) Push the water tank
clicks back into place on the appliance.
4) Put the water tank lid

Filling the milk tank

If you want to prepare drinks that contain milk froth, such as cappuccino or latte
macchiato, you must fill the milk tank with milk.
NOTE
► You can use full fat milk, long-life milk or soya milk for this appliance.
1) Tilt the milk tank
and forwards out of the appliance.
2) Take off the milk tank lid
3) Fill it with milk to at least the Min marking. Never fill it with more milk than
up to the Max marking.
4) Replace the milk tank lid
5) Push the milk tank
NOTE
► After preparing your drink, if you want to keep the milk in the milk tank
put the milk tank
NOTE
► If the milk tank
presso control lamps
espresso, as this does not require any milk.
■ 10 │ GB │ IE │ NI
and pull the water tank
back onto the appliance. Ensure that the water tank
back on.
lightly upwards and, at the same time, pull it upwards
.
on the milk tank
back into the appliance so that it clicks into place.
into the refrigerator for storage.
is not in place or not properly inserted, both of the es-
/ light up. This shows that you can only prepare
upwards and out
.
SEMM 1470 A1
,