Warranty; Troubleshooting; Ec Declaration Of Conformity - Dustcontrol DC 1800H Traduction Des Instructions De Service D'origine

Description
Plastic bag Longopac 12m
Plastic bag Longopac 23m
Fine filter, cellulose with integrated filter guard
Fine filter, polyester with integrated filter guard
HEPA filter
Basket for plastic bag
For spare parts, see the Dustcontrol

Warranty

The warranty period is two years and covers manufacturing defects. The warranty is valid on condition that the machine is used in
the normal way and receives the required service. Normal wear and tear is not covered. Repairs must be carried out by
Dustcontrol or personnnel authorized by Dustcontrol. Otherwise, the warranty is void.

Troubleshooting

Problem
Motor not running.
Motor stops immediately after starting.
Motor runs, but no suction.
Motor runs, but poor suction.
Machine blows dust.
Abnormal sound from machine.

EC Declaration of Conformity

We hereby declare that DC 1800H is in conformity with the following Directives and Standards: 2006/42/EC, 2014/35/EU,
2014/30/EU, EN 60204-1:2006/A1:2009, EN1822-1:A1:2009.
Dustcontrol AB
Part No.
44763
432177
42029
42028
42027
42369
website.
Cause
Power supply not connected.
Incorrect fuse.
Suction hose not connected.
Suction hose perforated.
Blocked filter.
Suction hose too long or narrow.
Hose partially blocked.
Top of machine poorly fitted.
Dust trapped in cyclone.
Filter loose or damaged.
DC 1800H, Art.nr. 94114-K
Action
Connect power supply.
Replace with correct fuse.
Connect hose.
Replace hose.
Clean or replace.
Replace hose.
Reverse or clean hose.
Adjust fitting.
Remove top and clean cyclone.
Check and replace as necessary.
Book service.
15