Table des Matières
Publicité
The intervals indicated in the periodic maintenance and lubrication tables must be intended as a general guide under
normal riding conditions. It could be necessary to reduce these intervals according to the climate, the ground condi-
tions, the geographic position and the conditions of use. Some of the operations can be carried out by the user,
providing he or she possesses the requisite skills and, however, only when explicitly scheduled in this Owner's
Manual. In any other case have the operations performed by a Benelli Authorized Workshop, whose list is available
on the web site www.benelli.com or calling the Benelli Coustomer Service dialling +39 0721.418740.
As a rule maintenance operations must be performed while the scooter is on the rear stand after
switching o the engine and setting the start switch to OFF. On the contrary, while checking the
uid levels it is advisable to keep the motorcycle in an upright position without using the rear stand.
Tables of scheduled maintenance
NOTE :
• The annual checks must be performed every year, except if a kilometer-based maintenance is performed instead.
• From 14.000 Km, repeat the maintenance intervals starting from 10.500 Km.
◙
• Items marked with an "
skills.
Code:
I = inspection and adjustment,cleaning,oiling, or change according to need.
R = change
T = tighten
◙
= dealer
69
" should be performed by a Benelli dealer as they require special tools, data and technical
Publicité
Table des Matières
