Waeco MagicWatch MWE900 Instructions De Montage Et De Service page 45

_MWE-900.book Seite 45 Freitag, 12. Januar 2007 4:53 16
MagicWatch MWE900
6.4 Connecting the control electronics
Caution!
Make sure the polarity is correct.
Note
On some vehicles, the reversing light only works when the ignition
is switched on. In this case, you must switch on the ignition in order
to identify the positive and earth wires.
The complete circuit diagram can be found in fig. i, page 9.
No. in
fig. i, Description
page 9
1
Control electronics
2
Reversing light
3
Black and blue cable in the control electronics connection
cable
4
Brown cable in the control electronics connection cable
5
Yellow cable from the loudspeaker
6
Blue cable from the loudspeaker
7
Grey cable for connecting to the radio's mute connection
8
Outer sensors (blue)
9
Inner sensors (black)
bl
Blue
br
Brown
ge
Yellow
rt/gr
Red/grey
sw
Black
Fitting the parking aid
45