Waeco MagicWatch MWE900 Instructions De Montage Et De Service page 35

Masquer les pouces Voir aussi pour MagicWatch MWE900:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 55
_MWE-900.book Seite 35 Freitag, 12. Januar 2007 4:53 16
MagicWatch MWE900
Warning!
To prevent short circuits, always disconnect the negative terminal
of the electrical system before working on it.
If the vehicle has an additional battery, its negative terminal should
also be disconnected.
Warning!
Inadequate cable connections can cause short circuits, resulting
in:
– Cable fires
– The airbag being triggered
– Damage to electronic control equipment
– Electrical malfunctions (indicators, brake light, horn, ignition,
lights)
Please therefore observe the following instructions:
Installing the parking aid can cause problems on vehicles with LED tail
lights.
When working on the following cables, only use insulated cable terminals,
plugs and flat push-on receptacles:
– 30 (direct supply from positive battery terminal)
– 15 (connected positive terminal, behind the battery)
– 31 (return line from the battery, earth).
Do not use terminal strips.
Use a crimping tool (fig. 1 7, page 3) to connect the cables.
Screw the cable for connections to cable 31 (earth)
– Screw on the cable using a cable terminal and serrated washer to one
of the vehicle's earth bolts or
– Screw the cable to the bodywork using a cable terminal and a self-tap-
ping screw
Make sure there is a good earth connection.
Safety and installation instructions
35

Publicité

Table des Matières
loading

Table des Matières