Self-Adhesive Electrodes; Technical Specifications - I-Tech SMART TENS Mode D'emploi

12. Self-adhesive electrodes.

The position of the electrodes is shown at the end of the manual.
The electrodes supplied are top quality, pre-gelled and ready for use, they are
particularly suitable for electrostimulation treatments.
They are very flexible making it easy to treat all areas. Remove the protective plastic
from the electrode before use, position it on the skin as shown in the manual and
replace the plastic after use.
Electrode duration is determined by the skin's pH value; we recommend no more than
20/30 applications using the same electrode.
Repeated use of the same electrodes can compromise stimulation safety, which is why
electrodes must not be used when they no longer stick to the skin; in fact it can cause
skin redness that can last for many hours after stimulation. Consult a doctor if this
occurs.
For a safe use please refer to indications and warnings on electrodes package and in
"Warning" paragraph.

13. Technical specifications.

Risk class: Class II in accordance with the 93/42/EEC directive (amended by
2007/47/EC).
Isolation class: Internally powered device with type BF applied parts, in accordance
with the EN 60601-1 standard.
Classification: IPX0, based on the penetration of liquids and powder; equipment
not protected.
Housing: ABS.
Power Supply: 4 AAA Size 1.5V batteries.
Limitations: equipment not suitable for use in environments with a high
concentration of oxygen and/or flammable liquids and/or flammable
gas; do not use with equipment for electrosurgery or short-wave or
microwave therapy.
Operation: equipment suitable for continuous operation.
Output channel: 2 channels, independent and galvanically isolated.
Output current: maximum power 60mA with 1Kohm load.
Type of impulse: compensated, biphasic, rectangular.
Frequency: operates with a range of impulses from 2 Hz to 120 Hz.
Impulse amplitude: from 50s to 400s.
Display: reflective LCD display.
Control keypad: 6-key keypad in ABS.
Dimensions: 110X65X20 mm.
Weight: 150 gr. including batteries.
I.A.C.E.R. S.r.l. 43 MNPG45-02