Cleaning The Blender; Cleaning The To-Go Blender Jug And To-Go Blade Insert; Using The Cleaning Programme - Bosch VitaPower 4 Série Notice D'utilisation

Cleaning the blender
WARNING
Risk of cutting!
The blender knife has sharp blades.
When cleaning and emptying the
▶
blender jug, watch out for the
sharp blades.
Never touch the edges of the
▶
blades with bare hands.
ATTENTION!
The blender knife has sharp blades.
Improper handling may damage the
blades or the surface.
Never set the blade insert down
▶
with the blade facing downwards.
Remove the measuring jug.
1.
→ Fig.
27
Remove the lid.
2.
→ Fig.
27
Turn the blender jug anti-clockwise
3.
and remove it from the base unit.
→ Fig.
28
Turn the blender jug upside down.
4.
Open the retaining bracket.
5.
→ Fig.
29
Remove the EasyClick blade insert
6.
from the blender jug.
→ Fig.
29
Clean the components.
7.
Cleaning the To-Go blender
jug and To-Go blade insert
ATTENTION!
The blender knife has sharp blades.
Improper handling may damage the
blades or the surface.
Never set the blade insert down
▶
with the blade facing downwards.
Turn the To-Go blade insert anti-
1.
clockwise and remove it from the
To-Go blender jug.
→ Fig.
30
Cleaning and servicing en
Turn the lid anti-clockwise and re-
2.
move it from the To-Go blender
jug.
→ Fig.
31
Open the mouthpiece on the lid.
3.
→ Fig.
31
Clean the components.
4.
Using the cleaning pro-
gramme
You can use the cleaning pro-
gramme to preclean the blender jug
and the blade insert.
Requirements
¡ The blade insert is installed.
¡ The blender jug has been attached
and locked.
¡ The blender jug is filled with clean-
ing fluid.
→ "Overview of recipes", Page 40
¡ The lid is attached and locked.
¡ The rotary switch is set to ⁠ .
Set the rotary switch to ⁠ .
1.
→ Fig.
8
a The status display (LED) on the
rotary switch lights up.
Press the programme button
2.
→ Fig.
11
a While the programme is running,
the LED for
status display (LED) goes out.
Wait until the appliance stops.
3.
Set the rotary switch to ⁠ .
4.
Turn the blender attachment anti-
5.
clockwise and remove it from the
base unit.
→ Fig.
16
Turn the lid in the direction
6.
remove it.
→ Fig.
32
Dispose of the cleaning fluid.
7.
a The most stubborn food residues
are removed.
Clean the components.
8.
lights up and the
and
39
.