THOMSON WIESEL FORCELine Instructions De Montage Et De Maintenance page 32

Mechanical Linear Drive Unit WIESEL FORCELine
If the equipment is used under special
conditions, we will be pleased to carry out an
exact investigation on lubrication
requirements. In this case, please contact
your supplier, or Tollo Linear AB directly.
Fig. 10
®
WIESEL FORCELine MLSM 60/80 KGT, MLSM 80 ZRT
1. Standard location of the grease nipple
2. Possible optional positions for the grease nipple
(Conversion to be carried out by the customer)
Screw of the ball screw drive
Readjustment of the preloading of the ball
screw drive can be undertaken only by Tollo
Linear AB service!
32
®
Grease type
Grease DIN51825-KPE1R-20 (petroleum-based poly-
urea grease)
Original grease: Fuchs Lubritec URETHYN E/M1
Quantity of grease
Size MLSM 60/80 KGT MLSM 80 ZRT
®
FORCELine
[cm³/100 km]
10.0 8.0