Cleaning And Maintenance; What If There Are Problems; Disposal; Technical Specifications - Beurer BS 69 Mode D'emploi

7. Cleaning and maintenance

WARNING
• Disconnect the device before cleaning it.
• Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the device or
accessories.
• Do not use the device again until it is completely dry.
• Do not clean the device in the dishwasher.
• Do not use aggressive cleaning agents or hard brushes.
• First unplug the device and allow it to cool off. Then you can clean it with a soft, slightly moistened cloth.
Then wipe it dry with a soft, lint-free cloth.

8. What if there are problems?

Problem Possible cause
Device does not On/off button switched off
light up
No electricity
No electricity
LEDs have reached the end of their service life.
LEDs faulty.

9. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its useful
life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in accord-
ance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any questions,
please contact the local authorities responsible for waste disposal.

10. Technical specifications

Model:
Supply voltage:
Input:
Output:
Average active efficiency:
No-load power consumption:
Device dimensions:
Weight:
Magnification factor:
Lighting:
Energy efficiency class:
Subject to technical changes
BS 69
Supplier: Shenzen Huoniu
Technology Co., LTD
Model: HNAD120030B1; HNAD120030E1
100-240 V~, 50/60 Hz, 0.35 A
12.0 V 0.3 A, 3.6 W
≥77, 61 %
≤0,071 W
3,9 x 40 x 21,5 cm (B x H x D)
approx. 1.1 kg
1 side 5x
30 LEDs
This product contains a light source with energy efficiency class G.
12
Solution
Switch on the on/off button.
Connect the mains part properly.
The mains part is faulty. Contact cus-
tomer services or your retailer.
If you need to have the device repaired,
contact customer service or an author-
ised dealer.