Gmaintenance; Maintenance Activities; Monthly - Tectro TAW 200 Manuel D'utilisation Et D'installation

G
MAINTENANCE

MAINTENANCE ACTIVITIES

In order to ensure an optimal operation of the heat pump boiler, a number of
checks and inspections on the heat pump boiler and the electrical wiring have to
be carried out at regular intervals.

1. MONTHLY

•
•
•
•
HOW TO CLEAN THE EVAPORATOR.
1)
2)
3)
4)
5)
G
6)
Screw 2
4
50
Check if the water tube connections are in good condition. This to avoid
water leakage.
Keep the heat pump boiler clean by means of a soft damp cloth.
Clean the air filter, if applicable, to keep an efficient performance.
Clean the evaporator every month. The evaporator is placed under the top
cover (See illustration 16).
Switch off the heat pump boiler.
Take out the power plug from power socket.
Remove the top cover by removing the 3 screws (see illustration 14), removing
the ducts when mounted, and disconnect the plug connected to the control
panel.
Wait until the evaporator is dry.
Clean the evaporator with a vacuum cleaner or brush.
Be careful when cleaning the evaporator as the fins are easy to be
deformed. This deformation must be prevented.
Reposition the top cover.
Screw 1
Top cover
Screw 3
Plug
Cleaning the evaporator
Illustration 14