Ebasic Control Panel Functions - Tectro TAW 200 Manuel D'utilisation Et D'installation

E
BASIC CONTROL PANEL FUNCTIONS
CONTROL PANEL
UP adjust button
Clock setting button
Illustration 9
LCD ICONS
Defrosting
When lit the icon indicates that the automatic defrost function is enabled.
Ventilating
When lit the icon indicates that the fan function is enabled.
Heating
When lit the icon indicates that the current operation mode is heating.
Before the compressor is started up, this icon keeps flashing, and will change
to bright when the compressor is 'ON'.
Hot water available
When lit the icon indicates that the domestic hot water temperature inside
the water tank has reached the set point. This icon also appears for 5 seconds
when the heat pump boiler is switched from the stand-by mode to the
running mode. In these 5 seconds the program is checking the hot water
temperature.
Electrical heating
When lit the icon indicates that the electrical heating function is enabled
according to factory default. The electrical heater will work according to the
control program.
DOWN adjust button
Electrical heater
'ON'/'OFF' button
Timer setting button
Run /stand-by mode button
4
43