Omron MIT Elite Plus Mode D'emploi page 37

HEM-7301-ITKE_main.book Page 37 Friday, October 3, 2008 12:42 PM
• Do not carry out any repairs yourself. If a defect occurs or you have
doubts about the correct functioning of the device, consult your
authorised OMRON dealer or the OMRON Customer Service.
Storage
Keep the unit in its storage case when not in use.
1.
Unplug the air tube from the air jack.
2.
Gently fold the air tube into the arm
cuff.
Note: Do not bend the air tube
excessively.
3.
Place the arm cuff and main unit in
the storage case.
Do not store the unit in the following situations:
• If the unit is wet.
• Locations exposed to extreme temperatures, humidity, direct sunlight,
dust, chemicals or corrosive vapours.
• Locations exposed to vibrations, shocks or where it will be at an
angle.
7.Maintenance and Storage
37
EN