Omron MIT Elite Plus Mode D'emploi page 19

HEM-7301-ITKE_main.book Page 19 Friday, October 3, 2008 12:42 PM
3.
Position the arm correctly.
1) The air tube should run
down the inside of your
forearm and be in line with
your middle finger.
2) The bottom of the cuff
should be approximately 1
to 2 cm above your elbow.
3) Apply the cuff to your
upper arm so that the
coloured marker (blue
arrow under tube) is
centred on the middle of
your inner arm and points
down the inside of the
arm.
Taking measurements on the right arm
Apply the cuff so that the
air tube is at the side of
your elbow.
• Be careful not to rest
your arm on the air tube,
or otherwise restrict the
flow of air to the cuff.
• The cuff should be 1 to
2 cm above the elbow.
4.
When the cuff is positioned correctly, close the fabric fastener
FIRMLY.
3.Using the Unit
EN
1 to 2 cm
19