Taking A Reading - Omron MIT Elite Plus Mode D'emploi

HEM-7301-ITKE_main.book Page 20 Friday, October 3, 2008 12:42 PM
3.Using the Unit
3.3

Taking a Reading

1.
Press the O/I START button to turn on the unit.
All symbols appear on the display.
The cuff starts to inflate automatically. As the cuff inflates, the
unit automatically determines your ideal inflation level. This unit
detects the pulse during inflation. Do not move your arm and
remain still until the entire measurement process is completed.
Note: To stop the inflation or measurement, press and release
the O/I START button. The unit will stop inflating, start
deflation and will turn off.
2.
When the measurement is complete, the arm
cuff completely deflates. Your blood pressure
and pulse rate are displayed.
20