SilverCrest SDR 1 A1 Instructions D'utilisation Et Consignes De Sécurité page 36

Setting Function
Signal
error
Displays the radio
Bitrate and
mode and the received
Codec
audio bit rate.
Displays the power
source (power adaptor
Power
or batteries). When
used
using batteries, the
battery load (in %) is
displayed as well.
Displays the cur-
rent time provided
Time
automatically by the
broadcaster.
Displays the cur-
rent date provided
Date
automatically by the
broadcaster.
Each time MENU/INFO 9 is
pressed, the next item is displayed.
Higher num-
ber – If the error
rate is high, it is
recommended to
re-orient the aerial
or/and re-position
the product.
˜ Presetting currently
active station
You can store up to 20 stations
(10 FM and 10 DAB).
Press and hold PRESET 3 .
Preset store<#:(Empty)>
appears on the display 2 .
Press / 5 / 6 to select a
desired station number.
Press SELECT 4 to confirm.
The station is stored. Preset #
stored appears on the display
2 .
NOTE: Station numbers under
which stations are already stored
will be overwritten.
˜ Recalling a preset
station
You can recall a previously saved
station by pressing PRESET 3 .
Press / 5 / 6 to select the
desired preset station number.
Press SELECT 4 to confirm.
NOTE: Preset Empty is
displayed if the preset number is
unoccupied.
GB/IE 37