Technical Specifications; Unit; Environment Conditions For Transport And Storage; Environments Conditions For Normal Use - Enraf Nonius Radarmed 650+ Mode D'emploi

12.1. Unit

Mains voltage
Frequency
Current consumption
Current rating
Safety class
Medical device classification
Weight
Dimensions
Safety tests
Marking

12.2. Environment conditions for transport and storage

Environment temperature
Relative humidity
Atmospheric pressure

12.3. Environments conditions for normal use

Environment temperature
Relative humidity
Atmospheric pressure

12.4. Classification

Medical class IIb
This equipment complies with all requirements of the Medical Device Directive (93/42/EEC).
International safety standard IEC 601-1
This equipment meets the requirements of the International Standard for the safety of medical electrical
equipment IEC 601-1 +A1, +A2 (general standard), IEC 601-2-6 (standard for microwave equipment), IEC
601-1-2 (standard for EMC) and IEC 601-1-4 (standard for programmable systems).
Non ionising radiation
Safety class 1
The unit is equipped with a safety earth and must be connected to a mains plug with earth contact.
Type B
The leakage current and safety earth correspond to standard IEC 601-1 and IEC 601-2-6.
Technical modifications reserved.
For the ordering data of the Radarmed 650+, standard accessories and additional accessories we refer to
the Catalogue for Physiotherapy.

12. TECHNICAL SPECIFICATIONS

: 220-240 Volt
: 50 Hz
: 1000 VA
: 4,5 Ampere
: 1 type B (according to IEC 601-1)
: IIb (according to Medical Device Directive (93/42/EEC))
: 45 kg (including arm)
: 93x39x49 cm (hxwxd including castors)
: IEC 601-1, IEC 601-2-6, IEC 601-1-2, IEC 601-1-4 (TÜV
Rheinland)
:
: -10° till +50° C
: 10 till 95 %
: 500 till 1060 hPa
: 10° till 40° C
: 10 till 90 %
: 500 till 1060 hPa

13. ORDERING DATA

27