Bosch GLM 100 C Professional Notice Originale page 20

OBJ_BUCH-1956-002.book Page 20 Monday, July 1, 2013 11:28 AM
20 | English
 If the text of the warning label is not in your national
language, stick the provided warning label in your na-
tional language over it before operating for the first
time.
 Do not direct the laser beam at persons or animals and
do not stare into the laser beam yourself. This measur-
ing tool produces laser class 2 laser radiation according to
IEC 60825-1. This can lead to persons being blinded.
 Do not use the laser viewing glasses as safety goggles.
The laser viewing glasses are used for improved visualisa-
tion of the laser beam, but they do not protect against laser
radiation.
 Do not use the laser viewing glasses as sun glasses or in
traffic. The laser viewing glasses do not afford complete
UV protection and reduce colour perception.
 Have the measuring tool repaired only through quali-
fied specialists using original spare parts. This ensures
that the safety of the measuring tool is maintained.
 Do not allow children to use the laser measuring tool
without supervision. They could unintentionally blind
other persons or themselves.
 Do not operate the measuring tool in explosive environ-
ments, such as in the presence of flammable liquids,
gases or dusts. Sparks can be created in the measuring
tool which may ignite the dust or fumes.
Protect the measuring tool against heat, e.g.,
against continuous intense sunlight, fire, wa-
ter, and moisture. Danger of explosion.
 In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
 Caution! When using the measuring tool with Blue-
tooth®, interference with other devices and systems,
airplanes and medical devices (e.g., cardiac pacemak-
ers, hearing aids) may occur. Also, the possibility of hu-
mans and animals in direct vicinity being harmed can-
not be completely exempt. Do not use the measuring
tool with Bluetooth® in the vicinity of medical devices,
petrol stations, chemical plants, areas where there is
danger of explosion, and areas subject to blasting. Do
not use the measuring tool with Bluetooth® in air-
planes. Avoid operation in direct vicinity of the body
over longer periods.
The Bluetooth® word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. and any use of such
marks by Robert Bosch Ltd. is under license.
2 609 141 026 | (1.7.13)
Safety Warnings for Battery Chargers
Keep the battery charger away from rain or
moisture. Penetration of water in the battery
charger increases the risk of an electric shock.
 Only charge Bosch lithium ion batteries or lithium ion
batteries installed in Bosch products. The battery volt-
age must match the battery charging voltage of the
charger. Otherwise there is danger of fire and explosion.
 Keep the battery charger clean. Contamination can lead
to danger of an electric shock.
 Before each use, check the battery charger, cable and
plug. If damage is detected, do not use the battery
charger. Never open the battery charger yourself.
Have repairs performed only by a qualified technician
and only using original spare parts. Damaged battery
chargers, cables and plugs increase the risk of an electric
shock.
 This battery charger can be used by children aged from
8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the battery charger in a
safe way and understand the hazards involved. Other-
wise, there is danger of operating errors and injuries.
 Supervise children. This will ensure that children do not
play with the charger.
 Cleaning and user maintenance of the battery charger
shall not be made by children without supervision.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Product Description and Specifica-
tions
Intended Use
The measuring tool is intended for measuring distances,
lengths, heights, clearances, grades and for the calculation of
areas and volumes. The measuring tool is suitable for measur-
ing indoors and outdoors.
The measuring results can be transmitted to other devices via
Bluetooth® and USB data port (not when operating the meas-
uring tool in the R60 Professional measuring rail).
Bosch Power Tools