Operation - Husqvarna AUTOMOWER 105 Manuel D'utilisation

Accessories
Applicable for Automower
305/310/315/315X/420/430X/
440/450X
This menu handles the settings for
the product accessories, for
4.1 To switch on, stop and switch off
the product
• The product can only start if it is switched
on and the correct PIN code has been
entered. To switch on the Automower
305, push the ON/OFF button for 3
seconds and check that the indicator
lamp is lit. To switch on all other models,
set the main switch to
• To stop to product, push the STOP button
on top of the product. The product stops
and the blade motor stops.
• To switch off Automower
ON/OFF button for 3 seconds and check
that the indicator lamp is not lit. To switch
off all other models, the main switch is set
0 .
to
4.2 Operating mode Automower
Push the Operation selection button 1-3 times
to select an operating mode. You can select
between 3 different operating modes.
HOME . Sends the product to the charging
•
station. It remains here until another
operation mode is selected. When the
battery is fully charged, the product will
not leave the charging station and begin
mowing until the operation selection is
AUTO .
altered to
AUTO . The standard, automatic operation
•
mode where the product mows and
charges automatically.
MAN . When mowing secondary areas the
•
MAN setting must be used. If MAN is
selected and the product is started when
it is out on the lawn, it mows until the
battery runs out. It then stops and

18 - Operation

®
4 Operation
®
1 .
4.3 Operating mode, START
Automower
420/430X/440/450X
®
305, push the
Push the START button to select one of the
following operating modes:
•
®
105
•
In the
must move the product manually between the
main area and the secondary area. The
product mows until the battery is empty. When
the battery is charged, the product moves out
of the charging station and stops. The product
is now prepared to start operation, but needs
confirmation from the operator first.
examples Automower
®
Automower Connect@Home.
Contact your local Husqvarna
representative for information on
what accessories are available for
your product.
the 'Needs manual charging' message
appears. The product must then be
moved manually to the charging station
and then started manually after charging.
If the product charges in the
it will fully charge, move about 20 cm / 8
in. out of the charging station and then
stop. This indicates that it is charged and
ready to start mowing.
®
305/310/315/315X/
Main area: The standard operating mode
where the product mows and charges
automatically.
Secondary area: When mowing
secondary areas this setting must be
chosen.
Secondary area mode, the operator
1418 - 004 - 10.03.2020
®
Connect or
MAN mode,