Displaying Stored Results; Deleting Measurements From The Memory - Gima KD-595 Manuel De L'utilisateur

29
then the monitor slowly releases air from the cuff and carries
out the measurement.
finally the blood pressure and pulse rate will be calculated and displayed
on the LCD screen. the blood pressure classification indicator
and Irregular heartbeat symbol (if any) will blink on the screen.
If the voice function is on, it will announce the measurement
result. the result will be automatically stored in the monitor.
e. after measurement, the monitor will turn off automatically after
1 minute of no operation. alternatively, you can press
the "Start" button to turn off the monitor manually.
f. During measurement, you can press the "Start" button to turn off
the monitor manually.
Note: please consult a health care professional for interpretation of pressure
measurements.

8. displaying stored results

a. In Clock mode, press "mEm" button, the last result
will be displayed with date and time. Irregular
heartbeat symbol (if any) and the indicator of blood
pressure classification will blink at the same time.
press "mEm" button repeatedly to review the
results measured previously.
b. If the voice function is on, the monitor will
announce each result in the memory.
c. When displaying the stored results, the monitor will turn off automatically
after 2 minutes of no operation. You can also press the button "Start"
to turn off the monitor manually.

9. deleting measurements from the memory

When any result is displaying, keeping on pressing
button "mEm" for three seconds, all results will be
deleted after three "beep". press the button "mEm"
or "Start", the monitor will turn off.
ENGLISH