Sony UP-DP10 Mode D'emploi page 22

Making Printer Setting from your Computer
[Graphics] tab settings
22
This tab is used to make settings related to images, such as the printing color
and brightness. Adjust these settings when you are not satisfied with the final
results of printing or when you need to make advanced adjustments.
Select either [Digital Camera Correction], [Color Balance], [Tone Curve], or
[Sharpness] in the [Color Correction] list box. The settings that can be made
underneath change, depending on which choice is selected.
To cancel any changes you have made and restore the initial settings, click
[Restore Defaults] on each screen.
<
[Digital Camera Correction]
Select this screen when printing an image from a digital camera in order
to correct the intensity and the saturation.
• If you click the [Use Digital Camera Correction] checkbox so that it is in
the checked (on) state, image correction processing that is suited for
digital camera images is performed on the image.
• Optimal processing can be performed by selecting [Auto].
• Selecting [Custom] allows you to manually set [Intensity] and
[Saturation].
Note
Setting [Saturation] to "0" causes the original saturation component to
be used, but setting [Intensity] to "0" does not cause the original
intensity component to be used.