Sony UP-DP10 Mode D'emploi page 11

When the Printer Is Connected by a
Printer Cable
1
Turn the printer on first, and then turn the
computer on. Once Windows 98 starts up,
the "Add New Hardware Wizard" window
appears.
If the "Add New Hardware Wizard" dialog
box does not appear when Windows 98 starts
up, install the printer by selecting [Start] t
[Settings] t [Printers] t [Add Printer].
2
Click [Next].
The window changes as shown below.
3
Select [Search for the best driver for your
device], and then click [Next].
The window changes as shown below.
4
Place the "Printer Software UP-DP10" CD-
ROM in the CD-ROM drive.
5
Select the [Specify a location] option, click
[Browse], specify the [Win98\English] folder
in the CD-ROM, and then click [Next].
The window changes as shown below.
6
Click [Next].
The window changes as shown below.
11