EINHELL GC-EL 2600 E Mode D'emploi D'origine page 18

Anleitung_GC_EL_2600_E_SPK1__ 14.10.13 11:06 Seite 18
GB
12. Troubleshooting guide
Fault
Motor does not start
18
Possible cause
No voltage present.
Power cord defective
Motor terminals disconnected
Suction tube not mounted correctly Mount the tube correctly
The cleaning cover is not mounted
correctly.
Remedy
Check the cord and fuses
Check the power cord
Have the unit checked by a
customer service workshop
Mount the tube correctly