DFS Alarm Function
Door System Confirmation
The door system confirmation feature was incorporated to ensure that the correct door sys-
tem type has been selected. (e.g. Set to "Door System: Negative" for GM vehicles.)
1. First, close all the vehicle's
doors. If the correct door sys-
tem type has been selected
then the Display will show
"Current mode: Close".
If not, select the alternative door
system type by pressing the 2 or 3
button. Lastly, confirm each door
triggers the Alarm by opening and
closing each vehicle's door.
2. As the vehicle's door is opened
the display should change
accordingly ("Current mode:
Close"–"Current mode: Open").
3. Press the FUNCTION button
to move to the next selection.
67