Selecting Door Switching Systems (Door); Door System Confirmation - Pioneer SuperTuner III DEH-P8200R Mode D'emploi

DFS Alarm Function

Selecting Door Switching Systems (DOOR)

It is necessary to select the correct "Door System Type" (Negative or Positive switching)
for that of your vehicle. Initially, the system is set for vehicles with the grounding type
(Negative switching).
Select the correct "Door System Type" of your vehicle from below.
7 Vehicles to select "Door-L :CLS"
GM, CHRYSLER, JAPANESE, EUROPEAN
7 Vehicles to select "Door-H :CLS"
FORD, JAGUAR, MERCEDES*, etc.
* Some Models Only.
• Select "Door-L :CLS" or
"Door-H :CLS" with the 2/3
buttons.

Door System Confirmation

The door system confirmation feature was incorporated to ensure that the correct door sys-
tem type has been selected. (e.g. Set to "Door-L :CLS" for GM vehicles.)
1. First, close all the vehicle's
doors. If the correct door sys-
tem type has been selected then
the Display will show "Door-L
:CLS".
If not, select the alternative door sys-
tem type by pressing the [ or ]
button. Lastly, confirm each door
triggers the Alarm by opening and
closing each door.
2. As the door is opened the dis-
play should change according-
ly ("Door-L :CLS" – "Door-L
:OPN").
3. Press the BAND button and
cancel the DFS Alarm Setting
Menu.
Setting of the "DFS Alarm" is now
complete.
Note:
• In case that the battery is disconnected, it may be necessary to reprogram the DFS Alarm Menu,
otherwise this setting needs to be done only once.
53