Selecting Door Switching Systems; Door System Confirmation - Pioneer DEH-P6200 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

DFS Alarm Function

Selecting Door Switching Systems

It is necessary to select the correct "Door System Type" (Negative or Positive switching)
for that of your vehicle. Initially, the system is set for vehicles with the grounding type
(Negative switching).
Select the correct "Door System Type" of your vehicle from below.
7 Vehicles to select "DOOR-L :CLS"
GM, CHRYSLER, JAPANESE, EURO-
PEAN
• Select "DOOR-L :CLS" or
"DOOR-H :CLS" with the
2/3 buttons.

Door System Confirmation

The door system confirmation feature was incorporated to ensure that the correct door sys-
tem type has been selected. (e.g. Set to "DOOR-L :CLS" for GM vehicles.)
1. First, close all the vehicle's
doors. If the correct door sys-
tem type has been selected
then the Display will show
"DOOR-L :CLS".
If not, select the alternative door
system type by pressing the 2 or 3
button. Lastly, confirm each door
triggers the Alarm by opening and
closing each vehicle's door.
2. As the vehicle's door is opened
the display should change
accordingly ("DOOR-L :CLS"
– "DOOR-L :OPN").
3. Press the BAND button and
cancel the DFS Alarm Setting
Menu.
Setting of the "DFS Alarm" is now complete.
Note:
• In case that the battery is disconnected, it may be necessary to reprogram the DFS Alarm Menu,
otherwise this setting needs to be done only once.
43
7 Vehicles to select "DOOR-H :CLS"
FORD, JAGUAR, MERCEDES*, etc.
* Some Models Only.

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Deh-p5200

Table des Matières