Basic Operation Of Built-In Cd Player; Switching The Display; Open; Track Search And Fast Forward/Reverse - Pioneer DEH-P6200 Mode D'emploi

Basic Operation

Basic Operation of Built-in CD Player

Switching the Display

Each press of the DISPLAY button changes
the display in the following order:
Playback mode (Elapsed play time)
= Disc Title
Note:
• If you switch displays when disc titles have
not been input, "NO TITLE" is displayed.

Track Search and Fast Forward/Reverse

• You can select between Track Search or Fast Forward/Reverse by pressing
the 2/3 button for a different length of time.
Track Search
Fast Forward/Reverse
Note:
• If a disc cannot be inserted fully or playback fails, make sure the recorded side is down. Press the
EJECT button and check the disc for damage before reinserting it.
• If a CD is inserted with the recorded side up, it will be ejected automatically after a few moments.
• If the Built-in CD player cannot operate properly, an error message (such as "ERROR-14") appears
on the display. Refer to "Built-in CD Player's Error Message" on page 49.
• The Built-in CD player is not equipped with CD TEXT function.
• A CD TEXT disc is a CD featuring recorded text information such as Disc Title, Artist Name and
Track Title.
11

Open

Note:
• Use to open the front panel
when loading or ejecting a CD.
(The illustration on the right
shows the front panel open.)
Play Time Indicator
Track Number Indicator
0.5 seconds or less
Continue pressing