Scan Play (T.scan); Pause (Pause); Disc Title Input (Title) - Pioneer SuperTuner III DEH-P8200R Mode D'emploi

Scan Play (T.SCAN)

Scan Play plays the first 10 seconds or so of each track on a CD in succession.
1. Press the FUNCTION button and select the Scan mode (T.SCAN) in the
Function Menu.
2. Switch the Scan Play ON with
the 5 button.
3. When you find the desired
track, cancel the Scan Play
with the ∞ button.
If the Function Menu has been can-
celed automatically, select the Scan
mode in the Function Menu again.
Note:
• Scan Play is canceled automatically after all the tracks on a disc have been scanned.

Pause (PAUSE)

Pause pauses the currently playing track.
1. Press the FUNCTION button and select the Pause mode (PAUSE) in the
Function Menu.
2. Switch the Pause ON/OFF with
the 5/∞ buttons.

Disc Title Input (TITLE)

You can use "TITLE" to input up to 48 disc titles for CDs in the Built-in CD player.
(Perform the same operation as (described) on page 33 under "Using Multi-CD Players".)
Note:
• After the title for 48 discs have been entered, data for a new disc will overwrite the oldest one.
• If you connect a Multi-CD player, you can input disc titles for up to 100 discs.
• When playing a CD TEXT disc on this product, you cannot switch to this mode.
28