Scan Play (T-Scan); Pause (Pause); Disc Title Input (Title In) - Pioneer DEH-P410 Mode D'emploi

Scan Play (T-SCAN)

Scan Play plays the first 10 seconds or so of each track on a CD in succession.
1. Press the FUNCTION button and select the Scan mode (T-SCAN) in the
Function Menu.
2. Switch the Scan Play ON with
the 5 button.
3. When you find the desired
track, cancel the Scan Play
with the ∞ button.
If the Function Menu is automatical-
ly canceled at this time, select the
Scan mode in the Function Menu
once more.
Note:
• Scan Play is canceled automatically after all the tracks on a disc have been scanned.

Pause (PAUSE)

Pause pauses the currently playing track.
1. Press the FUNCTION button and select the Pause mode (PAUSE) in the
Function Menu.
2. Switch the Pause ON/OFF with
the 5/∞ buttons.
Note:
• One-touch operation is possible with the remote controller (DEH-P410).

Disc Title Input (TITLE IN)

You can use "TITLE IN" to input up to 48 disc titles for CDs in the Built-in CD player.
(Perform the same operation as (described) on page 23 under "Using Multi-CD Players".)
Note:
• After the title for 48 discs have been entered, data for a new disc will overwrite the oldest one.
• If you connect a Multi-CD player, you can input disc titles for up to 100 discs.
18