Basic Operation; To Listen To Music - Pioneer SuperTuner III DEH-P8200R Mode D'emploi

Basic Operation

To Listen to Music

The following explains the initial operations required before you can listen to music.
Note:
• Loading a disc in this product. (Refer to page 11.)
1. Select the desired source. (e.g. Tuner)
Each press changes the Source ...
Each press of the SOURCE/OFF button selects the desired source in the following order:
Built-in CD player = TV = Tuner = Multi-CD player = External Unit 1 =
External Unit 2 = AUX = Telephone standby
Note:
• External Unit refers to a Pioneer product (such as one available in the future) that, although incom-
patible as a source, enables control of basic functions by this product. Two External Units can be
controlled by this product, although "External" is displayed whether you select External Unit 1 or
External Unit 2. When two External Units are connected, the allocation of them to External Unit 1
or External Unit 2 is automatically set by this product.
• In the following cases, the sound source will not change:
* When a product corresponding to each source is not connected to this product.
* When no disc is set in this product.
* When no magazine is set in the Multi-CD player.
* When the AUX (external input) is set to OFF. (Refer to page 48.)
* When the Telephone standby is set to OFF. (Refer to page 50.)
• When this product's blue/white lead is connected to the car's Auto-antenna relay control terminal,
the car's Auto-antenna extends when this product's source is switched ON. To retract the antenna,
switch the source OFF.
2. Extend the VOLUME forward.
When you press the VOLUME, it extends forward so that it becomes easier to roll. To
retract the VOLUME, press it again.
Continued overleaf.
8