Parts And Controls; Basic Operation - Pioneer DMH-100BT Mode D'emploi

4
Receive notices of software upgrades and software updates.
Protecting the LCD panel and screen
• Do not expose the LCD screen to direct sunlight when this product is not used. This
may result in LCD screen malfunction due to the resulting high temperatures.
• When using a cellular phone, keep the antenna of the cellular phone away from the
LCD screen to prevent disruption of the video in the form of spots, colored stripes, etc.
• To protect the LCD screen from damage, be sure to touch the touch panel keys only
with your finger and do so gently.
Notes on internal memory
• The information will be erased by disconnecting the yellow lead from the battery (or
removing the battery itself ).
• Some of the settings and recorded contents will not be reset.
About this manual
This manual uses diagrams of actual screens to describe operations. However, the
screens on some units may not match those shown in this manual depending on the
model used.
Meanings of symbols used in this manual
This indicates to touch the appropriate soft key on the touch screen.
This indicates to touch and hold the appropriate soft key on the touch screen.

Parts and controls

Main unit
-
VOL (+/ )
(HOME) Press to display the top menu screen.
Press and hold to power off. To power back on, press any button.
(MUTE) Press and hold to display off.
USB port
RESET Press to reset the microprocessor (page 5).
Microphone The Bluetooth microphone is built in the grill of the product. Speak toward the
microphone when you make a call.
NOTE
Depending on the usage condition of the vehicle such as the wind from the air
conditioner when using the hands-free function, it may be difficult for the
other party to hear your voice at their end.
LCD screen

Basic operation

Resetting the microprocessor
CAUTION
• Pressing the RESET button resets settings and recorded contents to the factory settings.
– Do not perform this operation when a device is connected to this product.
5
En